Demystifying Dental Bur Classification and Numbering Systems: A Simplified Guide

Dental burs are indispensable tools in dentistry, designed for a variety of procedures ranging from cavity preparation to polishing and surgical applications. With their global usage, a universally accepted numbering system is essential for ensuring consistency and ease of use across different regions and manufacturers.

The Evolution of Dental Bur Numbering Systems

1. Early Systems (SS White and ADA):

• SS White System (1891):
• Introduced the first machine-made dental bur numbering system.
• Classified burs based on 9 shapes and 11 sizes.
• Limitations: Restricted to stainless steel and tungsten carbide burs; not inclusive of diamond burs.
• ADA System (1955):
• Modified the SS White system, retaining its simplicity and practicality.
• Limited flexibility for introducing new burs and required memorization of tables.

2. ISO Classification System (1979):

The International Organization for Standardization (ISO) introduced a globally recognized 15-digit numbering system. This comprehensive system classifies burs based on five parameters:

1. Material of Cutting Head:
• 500: Tungsten carbide, 
• 806: Diamond (electroplated), 
• 807: Diamond (sintered).
2. Shank Type:
• Friction Grip (e.g., 314 for standard FG), 
• Contra-Angle (e.g., 204 for RA slow-speed), 
• Handpiece (e.g., 103 for straight HP).
3. Head Shape:
   Examples include 
• Round (001), 
• Inverted Cone (010), 
• Flame (243), 
• Pear (237).
4. Grit Size (Diamond Burs Only):
   Represented by a 3-digit code
• 494: Superfine (15 microns).
• 504: Extra Fine (30 microns).
• 514: Fine (50 microns).
• 524: Medium (100-120 microns).
• 534: Coarse (135-140 microns).
• 544: Extra Coarse (180 microns).
5. Maximum Head Diameter:
• Measured in millimeters divided by 100 (e.g., 1.6 mm = 016).

Challenges of the ISO System:

• While detailed and descriptive, the 15-digit code is complex and difficult to memorize for daily use.

Most Common ISO Dental Burs Used by Dentists

Dental professionals commonly use a range of ISO-classified burs depending on the procedure:

1. Round Diamond Bur (ISO 806 314 001):
   Used for cavity access, caries removal, and creating precise shapes in tooth structures.
2. Pear-Shaped Bur (ISO 806 314 237):
   Ideal for cavity preparation, particularly for creating undercuts and smooth internal walls.
3. Tapered Flat-End Bur (ISO 806 314 135):
   Used for crown preparation, especially for shaping and contouring.
4. Inverted Cone Bur (ISO 806 314 010):
   Commonly used for creating undercuts and flattening floors of cavity preparations.
5. Flame-Shaped Bur (ISO 806 314 243):
   Used for contouring, finishing, and shaping composite restorations or preparing veneers.
6. Torpedo Bur (ISO 806 314 284):
   Often utilized in crown preparations and finishing.

A Proposed Simplified Nomenclature

To address the challenges of existing systems, a new simplified naming convention is proposed, blending descriptive accuracy with ease of use. This system utilizes a combination of letters and numbers to classify burs, eliminating the need for memorizing complex codes.

Structure of the New System:

1. Shape (2 Letters):
• Examples: RD (Round), SF (Straight Fissure), PR (Pear), IC (Inverted Cone).
2. Maximum Head Diameter:
• Diameter in mm multiplied by 10 (e.g., 0.5 mm = 5).
3. Maximum Head Length:
• Length in mm multiplied by 10 (e.g., 3 mm = 30).
4. Material of Cutting Head:
• D (Diamond), C (Carbide), S (Steel).
5. Shank Type:
• FG (Friction Grip), SS (Short Shank), IS (Long Shank), LH (Latch-Type), SH (Straight Handpiece).
6. Additional Parameters:
• Grit coarseness (for diamond burs) or flute count (for carbide burs).

Example Designations:

• SF 12 30 DFG: Straight fissure bur, 1.2 mm head diameter, 3.0 mm head length, diamond friction grip.
• IC 12 10 CLH: Inverted cone bur, 1.2 mm head diameter, 1.0 mm head length, carbide latch-type.

Key Advantages of the Proposed System

1. Simplifies bur identification while retaining essential details.
2. Reduces reliance on memorization.
3. Provides flexibility for introducing new bur types.
4. Supports easy identification through laser markings on bur shanks.

Dental bur classification systems have evolved to meet the growing demands of modern dentistry. While the ISO system introduced a detailed global standard, its complexity poses practical challenges. The proposed simplified nomenclature strikes a balance between simplicity and comprehensiveness, enabling dental professionals to make precise, efficient choices for their procedures. By adopting such a system, the industry can achieve global standardization while maintaining ease of use.

MR. BUR CANADA we provide a wide range of dental burs selection in global.

Diamond Burs, Carbide Burs, Surgical & Lab Use Burs, Endodontic burs, IPR Kit, Crown Cutting Kit, Gingivectomy Kit, Root Planning Kit, Orthodontic Kit, Composite Polishers, High Speed Burs, Low Speed Burs 

Mr Bur Home Page  All Products